7 Points to 

Maintain Ceramic Coating

Ceramic coating is a type of protective layer applied to the surface of a car to provide a long-lasting high-gloss finish. It offers superior protection against the elements, such as UV rays, acid rain, and environmental pollutants.

However, to maintain ceramic coating and the shine and protective qualities it produces, proper maintenance is essential. In this blog, we will discuss the proper steps of ceramic coating maintenance.


Maintain Ceramic Coating

Regular Washing

The first and foremost step to maintain ceramic coating is regular washing. It is essential to keep the surface clean from dirt, dust, and other contaminants that can degrade the coating over time. Use a high-quality pH neutral car wash soap that does not contain any harsh chemicals or detergents that can damage the ceramic coating. Also, avoid using abrasive materials such as sponges or brushes that can cause scratches on the surface. Instead, use a microfiber towel or wash mitt for gentle cleaning.

Maintain Ceramic Coating


After washing a car, it is crucial to dry the surface thoroughly. Water spots can form on the ceramic coating if the water is allowed to evaporate on its own. Therefore, use a soft, absorbent microfiber towel to dry the surface completely. Avoid using chamois or any other abrasive material that can cause scratches. The high level of hydrophobicity of ceramic coatings also lend to faster drying by using a handheld dryer. These dryers also aid in getting every nook, cranny, and grille free of any remaining water.



Maintain Ceramic Coating

Avoid Harsh Chemicals

Ceramic coatings are resistant to many harsh chemicals, but they can still be damaged by some. To help maintain ceramic coating to its maximum age, avoid using acid-based wheel cleaners, degreasers, or solvents on your paint. These chemicals can damage the ceramic coating and reduce its longevity.   

Maintain Ceramic Coating

Use a Ceramic Coating Booster

Ceramic coating boosters are designed to extend the life of the coating and enhance its protective qualities. They contain high levels of SiO2 (silica dioxide), which is the primary component of ceramic coatings. Using a booster regularly can help maintain ceramic coating's hydrophobic qualities and increase its longevity.



Maintain Ceramic Coating

Don’t Park in the Sun

Parking your car in the shade or garage can help to reduce the amount of UV light that the ceramic coating is exposed to. UV rays can cause the coating to fade over time, so reducing exposure to them will help to keep your car looking its best for longer. It is best to avoid parking the car under trees or in areas where contaminants such as bird droppings can fall on the surface. These contaminants can degrade the coating over time.

Maintain Ceramic Coating

Avoid Automatic Car Washes

Automatic car washes can be very hard on ceramic coatings. They use brushes that can scratch the coating and often the soap includes a wax. The wax will cover up the natural hydrophobicity of the ceramic coating.



Maintain Ceramic Coating

Regular Inspection

To detect any extra measures needed to maintain ceramic coatings, regularly inspect your car’s coating for any signs of wear or damage. If there are any scratches or chips, they should be repaired immediately to prevent further damage. If you notice any other issues, it’s best to address them as soon as possible.


In conclusion, increasing the longevity of a ceramic coating requires proper maintenance and care. Regular maintenance washing, drying, and ceramic boosting, coupled with avoiding harsh chemicals and automatic car washes are all essential steps in ensuring the coating’s longevity.


By following these steps, with regular inspection of the coating, car enthusiasts can enjoy the benefits of a long-lasting, high-gloss finish for years to come. It’s important to note that these tips are general, always check the manufacturer’s instructions for specific care of the product you have used.

Pouring MaxShine Graphene Ceramic Coating GC-01 - Car Protection

Ceramic Coating FAQ's

Most frequent questions and answers

Ceramic coating is a liquid polymer that is applied to the exterior of a vehicle to create a hard, protective layer. It is made up of silica dioxide (SiO2), which is the same material found in quartz and glass.

  1. Prepare the vehicle. This includes washing the vehicle thoroughly, removing any contaminants, and polishing the paint.
  2. Apply the ceramic coating. The ceramic coating is typically applied using a microfiber applicator pad. A small amount of coating is placed on the pad and then spread thinly over the surface of the vehicle.
  3. Buff the coating. Once the coating has been applied, it needs to be buffed using a clean microfiber towel. This helps to remove any excess coating and to create a smooth, even finish.
  4. Cure the coating. Most ceramic coatings require time to cure. This can take anywhere from 24 hours to a week, depending on the product used and the environmental conditions.

Once the coating has cured, it will provide a hard, protective layer over the vehicle’s paint. This layer will help to protect the paint from scratches, marring, UV rays, oxidation, and other environmental damage.


Ceramic coating offers a number of benefits, including:

  • Protection from scratches and marring: Ceramic coating is very hard and resistant to scratches and marring. It can also help to protect against UV rays, oxidation, and other environmental damage.
  • Easier cleaning and maintenance: Ceramic coating makes it easier to clean and maintain a vehicle’s exterior. Dirt and grime repel off the coating, so less washing and waxing is required.
  • Enhanced shine and gloss: Ceramic coating gives a vehicle’s paint a deep, glossy shine.

The durability of ceramic coating varies depending on the product used and the way the vehicle is cared for. Our Ceramic coating last 7 years and our Graphene -Max version last 9 years 

Yes, it is possible to apply ceramic coating yourself. However, it is important to follow the manufacturer’s instructions carefully and to take your time to ensure a proper application. Watch DIY Ceramic Coating Video

Our Latest Posts

Leave a Reply

Your email address will not be published. Required fields are marked *